Q&A on Concrete Machinery Equipment, HZS60 Concrete Mixing Plant, HZS75 Concrete Mixing Plant

Q: What size cement tank is needed for the concrete 75 station? Is 80 tons okay?

Answer: A standard HZS75 mixing plant is equipped with a 100 ton powder tank. Of course, larger tonnage powder tanks can also be chosen to store cement, fly ash, and other materials.

Q: Is there any mobile concrete station at 25? Convenient to use in different places

Answer: The HZS25 concrete mixing plant is mobile, with the main engine, batching machine, metering system, control system, and lifting bucket all on one trailer, making migration very convenient.

Q: What lifting method is used for HZS50 concrete mixing plant? Is it for lifting the bucket?

Answer: According to industry standards, the HZS50 concrete mixing plant adopts the method of lifting the material with a lifting bucket.

Q: What is the price of the mixing host for HZS60 concrete mixing plant?

Answer: The price positioning of the mainframe used in the HZS60 concrete mixing plant varies from manufacturer to manufacturer. For specific details, please consult the manufacturer's sales department for a detailed inquiry.

Q: Can HZS50 concrete mixing plant produce high-grade concrete? What models can be produced?

Answer: The HZS50 concrete mixing plant can produce various types of concrete from C15 to C60.

Q: Is there a 75 model concrete station that can be moved?

Answer: The HZS75 concrete mixing plant is mobile, with the main unit, batching machine, metering system, control system, lifting system, etc. in one trailer unit, suitable for construction sites that are frequently moved.

Q: What is the reason for the stop of the mixing motor of the double horizontal shaft forced concrete mixer? How to exclude it?

Answer: There may be two reasons for the shutdown of the mixing motor: 1. However, due to overload, there are stones stuck in the mixing blade inside the mixing drum; 2. The rated current of the thermal relay is set too low. Remove the stones stuck between the mixing blade and the lining plate, and reset the thermal relay. Adjust the setting current value of the thermal relay to be equal to or slightly greater than 1H of the motor.